What Is a Traceable System of Record for Hardware?

What Is a Traceable System of Record for Hardware?
Contents
  1. What a traceable system of record for hardware is
  2. Why spreadsheets, a requirements tool, a PDM and chat threads are not one
  3. The chain a system of record must hold: requirement to verification evidence
  4. As-designed vs as-built: two halves of one record
  5. What to check when you evaluate a traceable system of record
  6. How Tandem holds the design-side record
  7. Start by tracing one requirement end to end

A traceable system of record for hardware is the authoritative record where every requirement, architecture decision, CAD design change, design review comment, release baseline and piece of validation evidence lives linked to the others. Anyone can trace from a requirement to the design that meets it, the change that altered it, the review that approved it and the test that proved it, and back again.

People use the phrase loosely. Most writing on it covers the build floor: serial numbers, part genealogy, as-built deviations. That half matters. But it is only as trustworthy as the design record it is built against, and that half gets skipped. This post defines the term, walks the full chain a system of record has to hold, separates the as-designed record from the as-built record, and gives you a checklist for evaluating one.

What a traceable system of record for hardware is

A system of record is the controlled, authoritative source for a given body of product data. It is not necessarily one tool for everything. In practice, a PLM often is the record for parts, BOMs and released revisions, while requirements and test evidence may sit in another system and link back.

Traceable adds a second test: the links are live, revision-aware and queryable in both directions. Change a requirement and you can see which design elements, reviews and tests it touches. If a test fails, you can walk back to the requirement it was meant to prove.

That bidirectional walk is what auditors, program reviewers and your own engineers actually need. A pile of documents that happen to be stored together is an archive. A system of record answers questions.

What does digital thread traceability mean for hardware?

Digital thread traceability means every link from a requirement through design, change, release and verification evidence stays connected, so you can follow it forward and backward. In hardware, that covers requirements, CAD changes, design reviews, ECOs and test results. A thread is only useful if it survives handoffs and keeps the reasoning behind each decision, not just the file versions.

Why spreadsheets, a requirements tool, a PDM and chat threads are not one

A spreadsheet, a requirements tool, a PDM and a chat history are four places holding four pieces of the story, and the links between them are manual.

The requirement lives in one tool. The CAD change lives in the PDM as a new revision with a terse comment. The reasoning for the change lives in a Slack thread or in someone's head. The review approval lives in an email. The test result lives in a spreadsheet. Each handoff is a place where a link breaks, because the only thing connecting them is a person remembering to update a cell.

The failure shows up later. An ECO lands and nobody can say which requirements it affects without a day of archaeology. An auditor asks why a feature changed and the answer is "ask the engineer who left." Static IDs pasted between tools go stale the moment either side revises.

A better spreadsheet won't fix this. You need a record where the relationships are first-class data, not copied text.

Is configuration management software the same as traceability?

No. Configuration management software controls which revisions and baselines are current, while traceability explains why a configuration looks the way it does. A PDM or PLM holds released parts, revisions and approvals. Traceability adds the links from each change back to the requirement it serves and forward to the evidence that verified it. Hardware teams usually need both, connected, rather than one tool standing in for the other.

The chain a system of record must hold: requirement to verification evidence

A real system of record holds an unbroken chain: requirement, system architecture node, CAD change, design review, ECO, release baseline, verification evidence. Each link needs to be a live relationship, not a pasted reference.

Requirement. Parent/child hierarchy, approvals, and a redlined change history, so you can show what a requirement said at any point and who changed it.

System architecture node. The system, subsystem and component the requirement allocates to, with interfaces between subsystems and attributes such as mass or status. This is what makes change-impact analysis possible: when a node changes, you know what hangs off it.

CAD change. The geometry change, plus the design goal behind it. A before/after diff with a summary of what moved and which requirements it affects is far more useful than a revision letter.

Design review. Comments anchored to the geometry, with the replies and the decision, linked to the requirements under review. For a deeper look at this link in the chain, see Design Review Audit Trails for Space Hardware Teams.

ECO. The formal change record, generated from the captured change rather than reconstructed from memory. See How robotics engineers run ECOs from CAD changes.

Release baseline. The pinned set of revisions that constitutes a release, so "what shipped" is a query, not a debate.

Verification evidence. Test cases and results linked back to the requirements they prove. For regulated programs, Design Verification Traceability in Medical Device Programs covers what that link has to show.

Most as-built guides begin at the release baseline. Everything to the left of it is the design-side half, and that's where the reasoning lives.

How do you trace a requirement down to the BOM?

Link each requirement to the design elements that satisfy it, such as parts, assemblies and features in CAD, then to the BOM lines those elements produce. When a requirement changes, you can see which parts and BOM entries are affected, and when a part changes, you can see which requirements it touches. Keeping that link inside the design record, instead of a separate spreadsheet, stops it going stale after each ECO.

As-designed vs as-built: two halves of one record

The as-designed record captures what the design is and why. The as-built record captures what was actually made: serial numbers, lot genealogy, build deviations and their dispositions.

Manufacturing execution and procedure tools usually hold the as-built half. Epsilon3, for example, is a procedure and execution platform, and its writing on building a traceable as-built record covers that side: lock the as-designed baseline, capture serialized identity at installation, record deviations with disposition, make the finished record queryable.

Look at step two in that sequence. You cannot record deviations from a baseline you have not pinned down. The as-built record is only as trustworthy as the as-designed record it is measured against. If the baseline is a folder of files with no requirement linkage, a deviation tells you a part differs from a drawing, not whether the difference breaks a requirement.

Tandem sits on the as-designed side. It holds the design record that execution tools build against. The two records meet at the release baseline: the design side hands over a pinned, traceable definition, and the execution side proves what was built to it. See Design Transfer to Manufacturing: Keeping the Verified Design Intact for that handoff.

What to check when you evaluate a traceable system of record

Test candidates against these criteria, in this order.

  1. Live links, not static IDs. Change a requirement and see whether linked items flag automatically. If linking means pasting an ID, it will rot.

  2. Change history with redlines. You should be able to show what a requirement said last quarter and who approved the change, in a form you could hand to an FDA, FAA or defense auditor.

  3. Impact analysis. When a CAD part or architecture node changes, can the system tell you which requirements, reviews and tests are affected before the ECO is signed?

  4. Works where engineers already work. If capturing a change means leaving SolidWorks, NX, Onshape, CATIA or Fusion to fill out a form, people will skip it. Capture has to happen in the CAD session.

  5. Continuous verification. Are requirements checked against live attributes from CAD, spreadsheets and telemetry, or only against a test report someone attached once?

  6. Design reasoning, not just geometry. Does it record why a change was made, linked to the review that approved it?

  7. Coexistence. Can it run alongside your existing PLM and requirements tool, pushing and pulling data, or does adoption mean ripping those out?

  8. Audit-ready history. Can you answer "show me the chain for this requirement" in minutes, not weeks?

A PLM is a common system of record for parts, BOMs and released revisions. It is a poor fit for capturing design intent, so check whether the candidate handles the design-side chain or only the released-data end.

What makes a good system of record for hardware teams?

A good system of record connects requirements, design intent, CAD changes, reviews, release and verification evidence in one place, and keeps that connection through ECOs and handoffs. Test it with a real change: can you see what the change affects, who approved it and why, and what evidence still holds? Check that it works alongside the PLM or PDM you already run, and that engineers will use it daily. A record nobody updates is not a record.

How Tandem holds the design-side record

Tandem is the context layer for hardware engineering: an AI-native platform that connects requirements, system architecture, CAD changes, design reviews, PDM and validation evidence in one system, so the reasoning behind decisions survives reviews, ECOs and handoffs.

Mapped to the chain above:

  • Requirements have a parent/child hierarchy and a redlined change history usable for FDA audit documentation.

  • System architecture nodes carry interfaces, attributes and git-style configurations, and agents use them for change-impact analysis.

  • CAD changes are captured by Watch in SolidWorks, Onshape, CATIA, NX and Fusion.

  • Design reviews run in a browser 3D viewer with annotations on geometry. Those annotations surface inside the CAD tool and link to requirements.

  • ECOs and ECNs are generated from captured CAD changes, in your own templates.

  • Release runs through Tandem PDM, with check-in/check-out, soft revisions and a release workflow (live for SolidWorks).

  • Verification uses test management linked to requirements, with validation evidence stored in the same system.

Tandem is not PLM software. Teams that run a PLM use Tandem alongside it, and Tandem pushes and pulls data to and from it. Execution tools hold serialization and lot genealogy, and Tandem holds the design record they build against. For a worked example of the chain under change, see Propulsion Engineering Requirements Traceability: One Injector Change.

Start by tracing one requirement end to end

A traceable system of record is not a product category you buy once. It is a property you can test. Pick one requirement on your current program and try to walk it to the architecture node, the CAD change, the review, the ECO, the release and the test result. Wherever you have to ask a person, the record is broken. If you want to see that walk done in one system, book a Tandem demo and bring your own requirement.

Visit Tandem

Tandem is the AI platform for hardware engineering. It connects requirements, system architecture, CAD design changes, design reviews, PDM and validation evidence in one system, so design intent survives every review, change and handoff. It works inside SolidWorks, Onshape, CATIA, NX and Fusion and alongside PLM, Jira, Slack and Teams, for hardware teams building complex products from prototype through production.

Get started

Sources

Frequently asked questions

What is the difference between a system of record and a PLM?

A PLM is often the system of record for parts, BOMs and released revisions. A traceable system of record for hardware reaches further upstream: requirements, architecture, CAD changes, design reviews and verification evidence. Tandem is not PLM software; it runs alongside your PLM, pushing and pulling data, and holds the design-side record.

Is a requirements tool a system of record for hardware?

A requirements tool is the record for requirements, not for the design that meets them. Traceability breaks where requirements meet CAD changes and reviews. Tandem integrates with Jama, and also holds requirements natively, linked to architecture, CAD changes, design reviews and test evidence, with continuous verification against live attributes.

What is the difference between as-designed and as-built records?

The as-designed record holds what the design is and why: requirements, architecture, CAD changes, reviews, releases and test evidence. The as-built record holds what was made: serials, lot genealogy and build deviations, usually in execution tools. Tandem holds the as-designed side that execution records are measured against.

What do auditors look for in a hardware traceability record?

Auditors look for a complete chain from requirement to design output to verification evidence, with dated, attributable change history. For FDA design controls, that means verification results tied to design inputs. Tandem's redlined requirement history and test management linked to requirements support that documentation.

Related reading

Written by

Tandem

Tandem is the AI platform for hardware engineering. It connects requirements, system architecture, CAD design changes, design reviews, PDM and validation evidence in one system, so design intent survives every review, change and handoff. It works inside SolidWorks, Onshape, CATIA, NX and Fusion and alongside PLM, Jira, Slack and Teams, for hardware teams building complex products from prototype through production.